ZERO FILLER CAP RANGE.
Zero 200 - The Zero 200 comes with an integrated 2.00" flange/neck. It is designed to be installed on a remote tank, using a suitable hose. This cap is also offered vented.
Zero 300 - The Zero 300 is designed to be mounted directly onto a tank using the flange.
All Zero range models are key operated and are supplied with two keys. There is a limited range of replacement keys available. The key number is not recorded, so a note should be taken of the key number stamped on the key upon installation.
A flat and smooth surface should be chosen to successfully install Zero filler caps. Where the filler cap is not in contact with the fuel, for example when fitted to outside skin of a vehicle, it is possible to accommodate a slightly curved surface but care must be taken not to distort the flange by over tightening the fixing screws. With 'wet' installations such as motorcycle and boat tanks, the use of a gasket is recommended.