CONNECTING HOSES
There are two types of connecting hoses, available in different sizes, length and diameter.
Wrapped Type Filler Hose in Nitrile
This type of filler hose is made from fuel resistant rubber. Owing to the method of construction the wrapped hoses do not bend easily. Straights and elbows should be used as required.
Applications: Engine and automotive industry. Only suitable for connecting the fuel filler to the fuel tank.
Special properties: High resistance to constant vibration, heat and cold; particularly suitable for oils and fuels;
Colour: Black.
Available a wide range of diameters.
STRAIGHTS
| Hose |
Inner Diameter |
Length |
Wall Thickness |
CHE32 180 |
32 mm |
1m |
5mm |
CHE38 180 |
38 mm |
1m |
5mm |
| CHE50 180 |
50 mm |
1m |
5mm |
CHE57 180 |
57 mm |
1m |
5mm |
CH88 180 |
88 mm |
1m |
1/4 Inch |
CHE88 180.5 |
88 mm |
1/2 m |
1/4" Inch |
CHPU60 180 |
60mm |
1m |
|
ELBOWS
| Hose |
Inner Diameter |
Elbow |
Wall Thickness |
CHE50 45 |
50 mm |
45º |
6mm |
CHE50 90 |
50 mm |
90º |
CHE57 45 |
57 mm |
45º |
CHE57 90 |
57 mm |
90º |
| CHE32 45 |
32 mm |
45º |
5mm |
| CHE32 90 |
32 mm |
90º |
| CHE38 45 |
38 mm |
45º |
| CHE38 90 |
38 mm |
90º |
(CH -Connecting Hoses)
(CH57 - number refers to diameter, 57 mm)
(CH57 45 - number refers to angle, 45°)
(CH58 180.4 - refers to the length, 4m)
Wire Wound, Nitrile Rubber Lined Filler Hose
 Lightweight, flexible and smooth hose made from a liner of nitrile sheet rubber, with a high tensile spring steel helix covered with nitrile coated nylon fabric, and having an outer cord of neoprene-coated polyester.
Applications: Engine and automotive industry. Can be used with all motor fuels and most lubricating oils.
Special properties: Light, flexible and resistant to constant vibration; good abrasion levels and suitable for very damp media; good resistance to condensates due to the enclosed helix;
Standard length:4000 mm & 1000 mm; shorter and longer lengths on request.
Colour: Black.
Other diameters on request.
| Hose |
Inner
Diameter |
Working Pressure
(bar) |
Inner Bending
Radius |
Weight
(g/m) |
Fabric Wall Thickness |
CH39 180 |
38 mm |
2.7 |
61 |
380 |
Approximately
1.1 mm |
| CH39 180-4 |
38 mm |
2.7 |
61 |
380 |
| CH45 180 |
44 mm |
|
|
|
| CH45 180-4 |
44 mm |
|
|
|
CH51 180 |
51 mm |
2.65 |
81 |
470 |
| CH51 180-4 |
50 mm |
2.65 |
81 |
470 |
CH58 180 |
57 mm |
2.6 |
91.5 |
547.5 |
| CH58 180-4 |
57 mm |
2.6 |
91.5 |
547.5 |
CH64 180 |
63 mm |
2.4 |
102 |
625 |
| CH64 180-4 |
63 mm |
2.4 |
102 |
625 |
Technical data valid at an ambient temperature of 20 deg.
|
